Backyard Ground Lights

YL-MBS17-X is a 45x45x36mm square backyard ground lights fixture powered by a 2W CREE 5050 chip, outputting 240lm at 90Ra with selectable 20/30/45/60° beam angles. Its IP68 protection and Φ32mm mounting hole suit uplighting trees, shrubs and ornamental plants where a square trim sits flush against mulch or hardscape. Runs on DC12/24V, 0.5m rubber cable, 3-year warranty.

1. Square cover with a 32mm hole size

 

The 45x45x36mm square housing shares the same Φ32mm bore as round variants in this line, so contractors swap trims mid-project without re-drilling-saving roughly 15 minutes per fixture on retrofit jobs.

2. High CRI, ≥90 Ra

 

2W input still yields 240lm at 90Ra CRI, matching the output of many 4W competitor fixtures, cutting total wattage on a 50-unit run to under 100W.

3. 304  stainless steel housing, IP68

 

304 stainless steel construction rated IP68 tolerates direct burial and standing water to 1m depth-a submersion margin PAR16-style IP65 alternatives cannot match.

 

4. Four beam angle options are available to suit different application scenarios.

 

Four beam options (20/30/45/60°) and five color temperatures (WW/NW/CW/RGB/RGBW) ship under one item number, cutting SKU count by up to 80% versus stocking separate beam/color variants.

Premium Backyard Ground Lights - IP68 Stainless-Steel Recessed Spotlights That Outlast Every Season

Outdoor Patio Ground Lights for Entertaining Decks & Al-Fresco Dining Zones

Traditional string lights and clip-on deck fixtures degrade quickly from UV exposure and moisture, tangling in furniture and requiring seasonal restringing-a persistent frustration for homeowners who entertain year-round. Our backyard ground lights recess flush into patio pavers, composite decking, or natural stone, providing permanent, maintenance-free ambient illumination that never interferes with furniture placement or foot traffic. The dimmable DC 12 V architecture integrates effortlessly with existing low-voltage landscape transformers, meaning no electrician rewiring. With 90 CRI warm-white output at 240 lm, food and décor appear rich and inviting under evening light-critical for outdoor dining areas. Café owners and boutique-hotel operators sourcing outdoor in ground spotlights for al-fresco dining perimeters benefit from our multi-color-temperature lineup: warm white (3000 K) for intimate atmospheres, neutral white (4000 K) for functional task lighting at service stations. Small-batch trial orders are available before committing to full patio-refit quantities.

Waterproof Ground Lights for Pool Surrounds & Spa Terrace Perimeters

Pool-deck lighting faces a punishing combination of chemical splash, standing water, and barefoot traffic-conditions that destroy standard garden fixtures within a single season. These backyard ground lights carry a genuine IP68 submersible rating and full 304 stainless-steel construction, shrugging off chlorinated water, bromine, and salt-system residue without pitting or discoloration. The compact Φ42 mm round variant tucks into narrow coping joints between pool tile and surrounding travertine, creating a seamless safety-glow perimeter that meets municipal pool-barrier lighting codes. RGBW color-changing capability syncs with smart-home pool controllers for party-mode color washes or calm single-tone evening ambiance. For pool builders and aquatic-facility contractors managing project pipelines, our factory maintains dedicated production capacity ensuring on-time delivery even during peak summer construction season-no allocation shortages that delay your client handover dates.

LED Ground Burial Light for Perimeter Fencing, Boundary Walls & Security Wash Lighting

Perimeter security lighting around residential compounds typically relies on bulky wall-mounted floods that create deep shadow pockets along fence lines-exactly the vulnerability intruders exploit. Recessed LED ground burial lights positioned every 2–3 meters along fence footings produce a continuous low-level wash that eliminates blind spots while maintaining a discreet aesthetic that doesn't broadcast "high-security compound" to the streetscape. The 60° wide-beam variant covers maximum wall surface from a close mounting distance, while the 20° narrow option reaches higher fence panels or pillar tops with concentrated intensity. 304 stainless-steel housings resist tampering and withstand ground-level impacts from lawnmowers and edgers. For property-management groups rolling out standardized security-lighting upgrades across multiple residential communities, we offer annual framework-supply agreements with fixed pricing and scheduled quarterly shipments.

Backyard Ground Spotlights for Sculpture Gardens, Feature Walls & Architectural Stone Accent

Off-the-shelf spotlights aimed at stone feature walls over-illuminate flat surfaces while leaving textured mortar joints in shadow, producing a washed-out appearance that undermines the architect's design intent. A precisely angled ground-recessed spotlight with a 20° or 30° beam rakes across stone, brick, or textured render at a shallow angle-amplifying every ridge, groove, and material grain with dramatic shadow play. Our CREE 5050 LED chip delivers 90 CRI color rendering, ensuring sandstone warmth, slate grays, and red-brick tones appear authentic rather than color-shifted. Available in square-bezel formats (45 × 45 mm or 55 × 55 mm) that complement geometric modern architecture, these backyard ground lights serve landscape architects designing high-end residential sculpture courts, memorial installations, and branded corporate entrance walls. Custom housing finishes and non-standard beam-angle optics are available on request for projects with unique aesthetic specifications.

FAQ

 

 

01.   How do your backyard ground lights handle the heat and UV exposure on a south-facing patio that gets direct sun all day?

The 304 stainless-steel housing and tempered-glass lens are inherently UV-stable-they will not yellow, haze, or become brittle from prolonged solar exposure, unlike polycarbonate or acrylic lenses found in budget fixtures. Internal operating temperature is managed by the efficient thermal path of the stainless-steel body acting as a passive heat sink, and the CREE 5050 LED chip is rated to maintain lumen output and color consistency across an ambient range of −30°C to +50°C. South-facing patios in hot climates are well within the design envelope.

02.  I'm a café owner-can I install these backyard ground lights in an existing stone terrace without tearing up the whole surface?

Yes. Installation requires only a core-drilled hole (as small as Φ32 mm for the compact model) at each fixture position. A standard masonry core bit on a handheld drill does the job in under two minutes per hole in stone, brick, or concrete. The fixture drops into the hole, and the low-voltage cable routes through a shallow channel beneath the surface or through the sub-base layer. There is no need to demolish and re-lay the entire terrace-most café-terrace retrofits are completed in a single day with minimal disruption to business operations.

03.  Are the RGBW backyard ground lights compatible with smart-home systems like Philips Hue or other Zigbee/WiFi controllers?

Our RGBW fixtures accept standard low-voltage PWM or DMX control signals, which makes them compatible with a wide range of third-party smart-lighting controllers and bridge modules. While they do not connect directly to Philips Hue's proprietary Zigbee bridge, affordable PWM-to-WiFi adapters and DMX-to-WiFi gateways are readily available that allow integration with Alexa, Google Home, Apple HomeKit, and other smart-home ecosystems. We can recommend specific compatible controllers based on your existing setup during the pre-sale consultation.

04.  How do your backyard ground lights perform for pool-deck perimeter lighting where chlorinated water regularly splashes onto the fixtures?

This is precisely the scenario our IP68 rating and 304 stainless-steel material choice are designed for. Chlorinated pool water is mildly acidic and chemically aggressive-it rapidly corrodes inferior metals and degrades rubber seals in non-IP68 fixtures. Our vulcanized-rubber cable glands and precision gasket seals are tested for prolonged chemical resistance, and 304 SS shows negligible reaction to chlorine and bromine compounds at pool-chemistry concentrations. We supply pool builders and aquatic-facility contractors specifically because these fixtures eliminate the annual replacement cycle that plagues standard deck lights.

05.  What finish options do you offer? My landscape architect has specified a matte-black bezel to match the backyard's dark-stone palette.

Standard housing colors include silver (natural brushed stainless), white, and black, all available from stock. The black finish provides the low-profile matte look many contemporary landscape designs require, blending into dark stone, charcoal pavers, or composite decking. For projects requiring a custom color match-such as bronze, anthracite, or a specific RAL number-we offer powder-coat and PVD finishing on a made-to-order basis with a modest lead-time extension. Contact our project team with your architect's finish specification for a custom-color quotation.

06.  How do these backyard ground lights hold up against lawnmower and string-trimmer impacts along a lawn-border installation?

Because the fixture sits completely flush with or slightly below the surrounding grade, there is no protruding element for a mower blade or trimmer line to strike. The stainless-steel bezel and tempered-glass lens can withstand incidental contact from edging tools without cracking or dislodging. This is a significant advantage over stake-mounted or bollard-style garden lights, which are frequently damaged or knocked out of alignment by routine lawn-maintenance equipment-a common pain point for property-management teams maintaining large backyard and common-area landscapes.

 

ABOUT US

SHENZHEN YLSTAR LIGHTING CO, LIMITED is a professional manufacturer and exporter that is concerned with the design, development and production of extrior Lighting, indoor lighting, Advertising lighting and led strip solution. We are located in SHENZHEN, with conveninet transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

 

CERTIFICATION

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, we have received ISO90001, CCC,CE, ROHS,FCC,SAA,TUV, ETL, cETL certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe, North America, Australia and other countries in the world.

 

WHY WORK WITH US

★Professional Sales and after-sales service Team

Experienced team, fast reaction.

Offering one-stop purchase service and one-stop lighting solution.

★Patented design

We design and manufacture led light with our own mold & technology.

★100% Inspection

All products must pass 3 times inspection before shipment.

All products are under 4 hours semi-product aging and another 4 hours finished product aging.

EXHIBITION

Hong Kong Spring Lighting Fair / Hong Kong Autumn Lighting Fair