in Ground Led Landscape Lighting

This in-ground led landscape lighting is DC12-24V and rated 3W/330lm, sized 42×42×53mm with a Φ32mm cut-out hole, available in 2700-6000K, RGB or RGBW. Built from 304 stainless steel and 6063 aluminum with IP67 protection, a 0.5m rubber cable, and a 3-year warranty. Used for gardens, patios, step and pathway lighting, facade wall grazing, and hotel or municipal landscape projects.

1. DC12-24V wide-voltage input

 

The fixture accepts anything from 12V to 24V DC and draws 3W, so one 60W driver carries 18 units on a single circuit instead of two. That 12V headroom also absorbs voltage drop across a 30m cable run, meaning the last light in the line reads the same brightness as the first - no dim tail end on long garden borders.

2. 3W delivering 330lm

 

At 3W the fixture puts out 330lm - 110lm per watt - enough to graze a 3m facade or wash a step riser from 300mm back. Running a low wattage inside a 6063 aluminum body keeps the LED junction well under its thermal ceiling, which is the reason output holds steady instead of fading through the first two seasons.

3. IP67 rated

 

IP67 is tested at 1m submersion for 30 minutes, not just splash resistance. Buried at grade, the housing sits in the exact spot where rainwater pools after a storm and where irrigation runoff collects, so the sealed driver cavity is what separates a 3-year install from a callback in month eight.

4. 304 stainless steel + 6063 aluminum

 

The 304 stainless face plate is the grade specified for coastal and pool-deck hardware because it resists chloride pitting, while the 6063 aluminum body handles heat dissipation. Splitting the two jobs across two alloys is why the visible surface stays clean at year three instead of rust-staining the surrounding stone.

5. 42x42x53mm square Cover, Φ32mm hole

 

One Φ32mm core-drilled hole and 53mm of depth is the entire install - no slab breaking, so it retrofits into finished stone, timber decking, and 60mm pavers. The square 42x42mm face aligns to paver joints and step edges, and the 11mm collar covers drilling tolerance up to 5mm off-center.

In Ground LED Landscape Lighting for Coastal Resorts & Pool Decks - Salt-Spray Corrosion Resistant

Painted aluminum or 201-steel uplights installed within 500m of the shoreline typically show rust bleed at the bezel inside 12-18 months, staining the surrounding travertine and forcing panel replacement, not just lamp replacement. The 304 stainless steel face plate resists chloride pitting while the 6063 aluminum body handles thermal load, so the visible surface stays clean through repeat salt exposure. IP67 at 1m/30min covers pool-deck washdown and irrigation runoff.

Inground Concrete Lights for Hotel & Commercial Facades - 24/7 Operation, Low Maintenance Cost

Hotel and retail facades run dusk-to-dawn, 365 nights a year - roughly 4,000 hours annually - and every failed unit on a lit elevation means a lift, a road closure, or a guest-facing dark spot. These inground concrete lights draw only 3W, keeping LED junction temperature well below its ceiling inside the 6063 aluminum heat sink, which is what holds output stable rather than fading through season two. DC12-24V wide input absorbs voltage drop across long facade runs, so unit 18 reads the same brightness as unit 1.

Outdoor Garden Ground Lights for Retrofit Paving - Φ32mm Hole, No Slab Breaking

Retrofitting finished gardens is where most inground specs fail: standard fixtures need a 60-80mm cut-out, which means lifting stone, re-bedding, and re-grouting. These outdoor garden ground lights install through a single Φ32mm core-drilled hole at 53mm depth, secured by screw nut with a 0.5m rubber cable tail - no slab breaking on completed patios, timber decking, or 60mm pavers. The Φ42mm face covers drilling tolerance off-center. Suited to garden borders, courtyard steps, driveway edging, and step-nosing lighting for house exteriors.

In Ground Yard Lights for Bulk Project Procurement - OEM, Custom CCT & Sample Orders

Landscape contractors and lighting distributors lose margin two ways: mixed color temperature across one elevation, and split deliveries that stall commissioning. Fixed-CCT SKUs in 2700K, 3000K, 4000K and 6000K ship pre-binned, so 40 in ground yard lights on a single facade stay visually matched with zero field sorting; RGB and RGBW versions cover DMX-controlled municipal and hospitality work. We support sample orders before bulk release, OEM packaging and logo, and one-to-one engineer selection support for annual framework and turnkey project purchasing.

FAQ

 

 

01.  Can these in ground lights be driven over by cars?

yes. It can be driven over by cars.

02.  What size hole do I need to drill, and can I retrofit into finished paving?

Use Φ32mm core drill, 53mm depth.

03.  How many fixtures can one driver run, and what size transformer do I need?

3W each on DC12-24V. It depends on the quantity of bulb you used. Usually one 100W power supply can connect about 20-25pcs bulbs.

04.  Will they survive being submerged or sitting in standing water?

No. As it is IP67 Rate, Please do not use it under water for long time.

05.  What's the beam angle?

There has different beam angle for your choice(20/30/45/60°).

06.  Do you accept sample orders, OEM branding, and what is the MOQ and lead time?

Yes. Usually we have all raw materials in stock and the delivery time is 3-7 days.

 

ABOUT US

SHENZHEN YLSTAR LIGHTING CO, LIMITED is a professional manufacturer and exporter that is concerned with the design, development and production of extrior Lighting, indoor lighting, Advertising lighting and led strip solution. We are located in SHENZHEN, with conveninet transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

 

CERTIFICATION

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, we have received ISO90001, CCC,CE, ROHS,FCC,SAA,TUV, ETL, cETL certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe, North America, Australia and other countries in the world.

 

WHY WORK WITH US

★Professional Sales and after-sales service Team

Experienced team, fast reaction.

Offering one-stop purchase service and one-stop lighting solution.

★Patented design

We design and manufacture led light with our own mold & technology.

★100% Inspection

All products must pass 3 times inspection before shipment.

All products are under 4 hours semi-product aging and another 4 hours finished product aging.

EXHIBITION

Hong Kong Spring Lighting Fair / Hong Kong Autumn Lighting Fair