Round Garden Path Ground Light

YL-MBS10-X is a Φ48×48mm round garden path ground light with a honeycomb anti-glare louver, running one CREE XTE 3W emitter at 240lm and CRI 90Ra with 6°–110° beam options. The Φ35mm cut-out drops into gravel paths, stepping stones and border edging without breaking the paving line. IP67, 304 stainless steel + 6063 aluminum; static load rating 500kg - planting beds, gravel borders and non-trafficked landscape areas, not rated for vehicle loading.

1. Honeycomb louver, 8mm recess depth

 

The CREE XTE chip sits roughly 8mm below the Φ48mm trim behind a honeycomb grid, so someone walking the path at 1.5m sees lit gravel rather than a 240lm point source. Landscape contractors log fewer post-handover glare callbacks on residential path jobs - the single most common complaint on garden lighting sign-off.

2. Φ35mm cut-out across the whole range

 

Every fixture in this series drills the same Φ35mm hole. Change from honeycomb to grille to beam type mid-project and the installer keeps one core bit and one hole size, so no paving gets re-cut. Cut once, decide the optic later.

3. 304 stainless steel trim + 6063 aluminum body

 

The visible ring is 304 stainless, the heat sink 6063 aluminum - two metals doing two jobs instead of one compromise casting. Silver, white and black finishes all use the same base, so a mixed-finish scheme stays dimensionally identical. IP67, 500kg static load, 3-year warranty.

Anti-Glare Recessed Ground Lights for Residential Garden Path & Stepping-Stone Projects

Conventional flush-lens path lights sit level with the paving, so anyone walking at 1.5m looks straight into the emitter - the single most common complaint at landscape handover, and one that usually forces on-site shrouding or fixture replacement. The honeycomb louver recesses the CREE XTE chip inside the Φ48mm housing, so the beam lands on gravel and stepping stones while the source stays out of the sightline. Specified for residential gardens, courtyard paths and boutique hotel walkways where guests walk directly over the fixture line.

Waterproof Ground Lights for Freeze-Thaw and High-Latitude Outdoor Installation

Buried fixtures in Northern Europe, Canada and Northern China sit in ground that freezes and thaws repeatedly, and a housing sealed only at the lens will draw moisture through the cable within two seasons. This unit is IP67 rated with a 0.5m factory-terminated rubber cable - no field-cut gland, no wicking path into the driver cavity. The 304 stainless steel trim resists de-icing salt runoff from adjacent paths. Rated 500kg static load for planting beds and non-trafficked gravel borders.

OEM & Private-Label Supply for Landscape Lighting Brands

Brands sourcing garden path fixtures usually face two blocks: minimum order volumes that tie up cash, and housing finishes locked to the factory's stock colors. This model ships in silver, white and black on the same die-cast base, with a patented structure (Patent No. 202230569957.3) available for private-label programmes. We support sampling from 5pcs, logo laser-marking on the trim, and custom cable lengths beyond the standard 0.5m. Engineer-to-engineer selection support is provided at quotation stage.

FAQ

 

 

01.   What Are the Best Outdoor Patio Ground Lights for Entertaining Spaces?

The best outdoor patio ground lights combine durability, brightness, and aesthetic appeal. LED recessed ground lights are the top choice for patios because they sit flush with the surface, eliminating trip hazards while providing a sleek, modern look. Look for models rated IP65 or higher for waterproof protection, with warm white (2700K–3000K) color temperatures to create an inviting ambiance. Solar-powered options work well for patios without wiring access, while low-voltage 12V systems offer brighter, more reliable output. For added versatility, RGB inground lights allow you to switch colors to match different moods or occasions.

02.  How Do I Choose Waterproof Ground Lights That Last in All Weather Conditions?

When selecting waterproof ground lights, the IP (Ingress Protection) rating is the most critical specification. An IP65 rating protects against low-pressure water jets, while IP67 means the light can survive temporary submersion - ideal for areas prone to flooding or standing water. For year-round outdoor use, choose LED ground burial lights with stainless steel or marine-grade aluminum housings, as these materials resist rust and corrosion. Tempered glass lenses outperform plastic ones in both clarity and scratch resistance. Always check that the internal sealing uses silicone gaskets rather than rubber, since silicone holds up far better against UV exposure and temperature swings over time.

03.  How Do You Install LED Recessed Ground Lights in a Driveway or Walkway?

Installing LED recessed ground lights requires five key steps. First, plan your layout by spacing lights 6–8 feet apart along the path edges. Second, dig holes slightly larger than the light housing - typically 4–6 inches deep depending on the model. Third, lay the low-voltage cable in a shallow trench connecting each fixture to the transformer. Fourth, place a layer of gravel at the bottom of each hole for drainage, insert the mounting sleeve, and secure it with concrete or compacted soil. Finally, connect the wiring, snap the light into the sleeve, and test the system. Always use a dedicated outdoor-rated transformer and ensure all cable connections are sealed in waterproof junction boxes to prevent moisture damage.

04.  What Are the Advantages of Using Ground Lights for Trees and Landscape Uplighting?

Ground lights for trees create dramatic uplighting effects that highlight trunk textures, canopy shapes, and seasonal foliage. Outdoor in-ground spotlights with adjustable beam angles (typically 15° to 60°) give you full control over the lighting spread - narrow beams emphasize tall, slender trees like birch or cypress, while wider beams work better for broad canopy trees like oaks and maples. LED ground burial lights are energy-efficient, consuming 70–80% less power than halogen alternatives while lasting over 50,000 hours. Positioning the spotlight 1–2 feet from the trunk base and angling it upward at 60–75° produces the most natural-looking illumination. For multi-colored seasonal displays, RGB inground lights let you shift from warm autumn tones to cool winter blues with a single remote or app control.

05.  Can RGB Inground Lights Be Used for Both Decorative and Functional Outdoor Lighting?

Yes, RGB inground lights serve both decorative and functional purposes effectively. Modern RGB models offer 16 million color options along with dedicated warm white and cool white modes, making them practical for everyday pathway illumination as well as festive or themed décor. Many units now come with smartphone app control or RF remotes, allowing you to program color-changing sequences, set timers, and adjust brightness from 10% to 100%. For functional use, set them to a steady warm or neutral white. For parties, holidays, or events, switch to dynamic color modes. When shopping, prioritize models that include a standalone white LED chip (often labeled "RGBW") rather than those that mix red, green, and blue to simulate white - the dedicated chip produces a much cleaner, more natural white light.

06.  What Is the Difference Between Garden Ground Spotlights and LED Recessed Ground Lights?

Garden ground spotlights and LED recessed ground lights differ mainly in mounting style, beam direction, and application. Ground spotlights typically sit on or slightly above the surface with an adjustable head, allowing you to tilt and aim the beam at trees, walls, or architectural features. They are easy to reposition and ideal for flexible landscape designs. LED recessed ground lights, on the other hand, are installed flush with the ground surface, casting light straight upward or at a fixed angle. They are best suited for driveways, walkways, patios, and decks where a clean, unobtrusive look is desired. Recessed models generally require a higher waterproof rating (IP67 or above) since they are fully exposed to pooling water and foot traffic. Choose spotlights when you need directional accent lighting and recessed lights when you want seamless, hazard-free ground-level illumination.

 

ABOUT US

SHENZHEN YLSTAR LIGHTING CO, LIMITED is a professional manufacturer and exporter that is concerned with the design, development and production of extrior Lighting, indoor lighting, Advertising lighting and led strip solution. We are located in SHENZHEN, with conveninet transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

 

CERTIFICATION

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, we have received ISO90001, CCC,CE, ROHS,FCC,SAA,TUV, ETL, cETL certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe, North America, Australia and other countries in the world.

 

WHY WORK WITH US

★Professional Sales and after-sales service Team

Experienced team, fast reaction.

Offering one-stop purchase service and one-stop lighting solution.

★Patented design

We design and manufacture led light with our own mold & technology.

★100% Inspection

All products must pass 3 times inspection before shipment.

All products are under 4 hours semi-product aging and another 4 hours finished product aging.

EXHIBITION

Hong Kong Spring Lighting Fair / Hong Kong Autumn Lighting Fair