in Ground Yard Lights

YL-MBS20-X is a Φ62x41mm round in ground yard lights fixture with a 3W CREE 5050 chip and 330lm output, housed in IP68-rated 304 stainless steel with a Φ42mm hole. It suits hotel and clubhouse entrance plazas, commercial street frontage, and uplighting sculptures, monuments or flagpoles. Beam angle 20/30/45/60°, DC12/24V, 3-year warranty.

1. Brand led chip, 3W wattage

 

Stepping up to a 3W CREE 5050 chip pushes output to 330lm-37.5% higher than the 240lm 2W units in this line-while each fixture still draws under 0.28A at 12VDC.

2. Waterproof IP68, 304 stainless steel

 

The Φ62x41mm body and Φ42mm bore are IP68-rated for continuous submersion beyond 1m, built in 304 stainless steel that outlasts zinc-alloy bodies rated only IP65.

3. CRI≥90Ra

 

90Ra CRI at 330lm delivers enough output to uplight a 3-4m monument or flagpole from a single recessed fixture, versus needing two 240lm units for equivalent coverage.

 

4. Four selectable beam angles from 20° to 60°, WW/NW/CW/RGB/RGBW color options

 

20/30/45/60° adjustable beam plus WW/NW/CW/RGB/RGBW color options are backed by a 3-year warranty, giving spec writers one data sheet covering both narrow-spot and wide-wash monument lighting.

In Ground Yard Lights - Compact, High-CRI Recessed LED Spotlights for Residential & Municipal Landscape Projects

Garden Ground Spotlights for Café Terraces, Outdoor Lounges & Hospitality Courtyards

Cafe and restaurant operators investing in outdoor seating areas need lighting that enhances ambiance without becoming a maintenance burden or an obstacle to daily furniture rearrangement. Post-mounted or stake-type garden lights get knocked over by staff, block table placement, and require re-aiming after every rearrangement-a daily nuisance that eats into operating efficiency. Our in-ground yard lights mount permanently flush with the terrace surface, invisible to foot traffic and impervious to furniture repositioning. The 2 W warm-white model at 240lm creates an intimate candle-like under glow on stone and wood surfaces, while the RGBW variant enables one-tap color-theme changes for special events-Valentine's reds, brand-color spotlights for product launches, muted blues for evening jazz nights. For F&B franchise groups standardizing outdoor-area lighting across dozens of locations, we support custom-packaged kits pre-wired and labeled per site plan, reducing on-site installation time to under 15 minutes per fixture.

Waterproof In-Ground Lights for Public Park Trails, Greenways & Municipal Cycling Paths

Park and greenway lighting must serve two competing goals: sufficient visibility for nighttime safety, and minimal environmental disruption to wildlife habitats and neighboring residences. Overhead pole lights achieve the first but fail the second, flooding tree canopies with light pollution that disrupts bird and insect behavior. Recessed in ground yard lights positioned at path-edge level deliver precisely directed wayfinding illumination downward and outward, keeping the upper canopy dark. The 45° beam angle covers a standard 1.8 m path width from a single-side installation, reducing fixture count and cable runs by half compared to double-sided layouts. For city parks departments and landscape-engineering consultancies managing multi-year greenway expansion budgets, we offer framework-contract pricing with deferred delivery scheduling-order the full project quantity now at locked pricing, and call off shipments phase by phase as construction reaches each trail section.

In-Ground LED Lights for Flagpole, Monument & Sculpture Uplighting in Civic Spaces

Uplighting civic monuments and flagpoles with exposed surface-mount spotlights creates visual clutter at the base of solemn memorials and invites vandalism or theft in unmonitored public spaces. Recessing the light source below grade maintains a clean, reverent ground plane while delivering powerful 330 lm uplight from the 3 W CREE module-sufficient to illuminate a 10 m flagpole or a 3 m bronze sculpture with crisp, high-CRI fidelity that honors material textures and fine detail. The 20° narrow beam minimizes spill onto adjacent surfaces, complying with dark-sky ordinances increasingly enforced in civic districts. For memorial foundations and government procurement officers accustomed to strict bidding procedures, we provide complete technical-submittal packages including photometric reports (IES files), material-certification documents (304 SS mill certs), IP68 test reports, and 3-year warranty terms-streamlining the approval process and eliminating RFI cycles that delay project award.

In Ground Yard Lights for Extreme-Climate Installations - Freeze-Proof, Sand-Resistant, Salt-Fog Rated

Landscape lighting in extreme environments-sub-arctic winters, Middle Eastern sandstorms, or tropical coastal monsoons-destroys commodity fixtures within a single season. Plastic lenses haze from UV and sand abrasion; zinc-alloy housings pit from salt fog; silicone seals harden and crack below −20 °C. Every failed fixture means a costly dig-and-replace cycle plus aesthetic damage to the surrounding hardscape. Our in ground yard lights are engineered end-to-end for punishing conditions: tempered-glass lens, 304 stainless-steel body rated beyond C4 corrosion resistance, and a vulcanized-rubber cable gland maintaining IP68 seal integrity from −30 °C to +50 °C. This full-spectrum durability makes them the specification-grade choice for resort developments in the Maldives, pipeline-corridor lighting in the Arabian Gulf, and municipal projects in Scandinavian coastal towns. For EPC contractors and international project-management firms requiring multi-region delivery logistics, we coordinate consolidated container shipments with per-site labeling and packing lists, ensuring each project location receives exactly the right SKU mix without cross-shipment confusion.

FAQ

 

 

01.   How compact are your inground yard lights, and can they fit into tight spaces between pavers or in narrow planting beds?

Our smallest model measures just Φ42 × 36 mm and requires only a Φ32 mm installation hole-roughly the diameter of a large coin. This ultra-compact footprint allows installation in spaces that are too tight for any competing fixture: narrow joints between paving stones, small pockets in gravel paths, thin planting strips along fences, and minimal soil gaps between tree roots. The square variants (45 × 45 mm and 55 × 55 mm) are available for geometric-paver layouts where a round bezel would look out of place. Despite their small size, these fixtures deliver the same 240–330 lm output and full IP68 rating as larger units.

02.  I operate a café franchise with 25 locations. Can you supply pre-wired, site-specific kits to simplify installation across all my terraces?

Yes-this is exactly the kind of multi-site deployment we specialize in. For franchise and chain operators, we assemble custom-packaged fixture kits pre-wired and labeled according to each site's layout plan. Each kit arrives with the correct quantity, beam angles, color temperatures, and cable lengths for its designated location, along with a simplified installation guide referencing the site plan. This reduces on-site installation time to under 15 minutes per fixture and eliminates the sorting, counting, and specification-checking that wastes contractor hours when generic bulk boxes arrive. Contact our project team with your site plans for a per-location kit quotation.

03.  Are your inground yard lights suitable for public parks where vandalism and theft are concerns?

Yes. The fully recessed installation means there is no protruding fixture to grab, kick, or pry out-only a flush stainless-steel bezel visible at ground level. The fixture body is locked in place by the surrounding soil, concrete, or paver assembly, and the low-voltage cable exits below grade with no exposed connections. This makes the fixture essentially vandal-proof without requiring anti-tamper screws or security cages that add cost and complicate maintenance. Municipal parks departments and public-space landscape firms choose our fixtures specifically because the recessed design removes the vandalism target entirely.

04.  How do your inground yard lights minimize light pollution for installations near wildlife habitats or residential boundaries?

Unlike pole-mounted or bollard lights that scatter light in all directions (including upward into tree canopies and neighboring windows), our recessed fixtures direct all output horizontally and slightly downward from ground level. The selectable beam angle (20°/30°/45°/60°) lets the designer precisely control the light cone-the 45° option, for example, covers a standard 1.8 m path width from a single-side installation without any upward spill. This makes our fixtures compliant with dark-sky ordinances and International Dark-Sky Association guidelines increasingly mandated in parks, greenways, and ecologically sensitive municipal zones.

05.  Can these in ground yard lights withstand extreme cold in northern-climate installations (Scandinavia, Canada, northern US)?

Yes. The full operating range is −30°C to +50°C. The 304 stainless-steel housing does not suffer cold-induced brittleness, and the vulcanized-rubber cable gland maintains its seal elasticity well below the rated minimum. The CREE LED chip sustains full lumen output and consistent color temperature across the entire range-there is no warm-up delay or color shift when the fixture activates in sub-zero conditions. We supply municipal and resort projects in Scandinavian coastal towns, northern Canadian communities, and high-altitude alpine developments where multi-month freeze conditions and daily freeze-thaw cycling are standard.

06.  What makes your fixtures suitable for sandy or desert environments where wind-blown grit is constant?

The tempered-glass lens resists surface abrasion from wind-driven sand particles far better than polycarbonate or acrylic lenses, which haze and lose optical clarity within a single sandstorm season. The IP68 seal prevents fine grit from entering the housing interior-a common failure mode in desert installations where lower-rated (IP65/IP66) fixtures accumulate internal sand deposits that block light output and trap heat, accelerating LED degradation. Our fixtures are deployed in Middle Eastern resort developments and pipeline-corridor lighting projects where continuous sand exposure is a design given, not an exception.

 

ABOUT US

SHENZHEN YLSTAR LIGHTING CO, LIMITED is a professional manufacturer and exporter that is concerned with the design, development and production of extrior Lighting, indoor lighting, Advertising lighting and led strip solution. We are located in SHENZHEN, with conveninet transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

 

CERTIFICATION

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, we have received ISO90001, CCC,CE, ROHS,FCC,SAA,TUV, ETL, cETL certification. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe, North America, Australia and other countries in the world.

 

WHY WORK WITH US

★Professional Sales and after-sales service Team

Experienced team, fast reaction.

Offering one-stop purchase service and one-stop lighting solution.

★Patented design

We design and manufacture led light with our own mold & technology.

★100% Inspection

All products must pass 3 times inspection before shipment.

All products are under 4 hours semi-product aging and another 4 hours finished product aging.

EXHIBITION

Hong Kong Spring Lighting Fair / Hong Kong Autumn Lighting Fair